FR Treating vs Coating

Preserved Wood


The best resource for Western preserved wood products is just a click away with

The website offers key information about preservative-treated wood products to properly select, specify and use Western preserved wood. The Online Technical Library boasts an extensive collection of downloadable publications, technical sheets and design tools to guide using preserved wood on almost any project.

Check out today!

Treating vs. Coating

Protecting wood from the dangers of fire is not easy, since wood itself is a combustible material. The unpredictable nature of fire, as well as the many different ways wood is used in construction, makes it critically important that any protection for wood must be durable and inside and outside the wood.

There are a host of coating products promoted today intended to protect wood from fire. While these coatings can offer some protection, there are significant differences when compared to wood that has been infused with fire retardants.

These differences are recognized in the International Building Code. Section 2303.2 of the code defines fire-retardant-treated wood as “wood products impregnated with chemicals by a pressure process.” If not applied through pressure, the fire retardant treatment “shall be an integral part of the manufacturing process of the wood product.”

Benefits of Infusion

Pressure treating infuses the fire retardant deep into the cells of the wood, not just the surface. The combination of pressure and fire retardant treatments change the chemistry of the wood, so when it is heated, it gives off water and carbon dioxide which slows or stops the spread of flames. Infused fire retardants dilute the flammable gases that are created when wood is heated and encourage charring, which insulates the wood below and slows fire growth.

Impregnating wood with fire retardants adds to the durability of the treatment. Since it is in the wood cells and not just on the surface, the fire retardant is not damaged during or after construction. This long-lasting durability is unmatched compared to other protections such as coatings.

Surface Coatings

By comparison, fire retardant coatings applied during or after construction only cover the surface of the wood. Many claim to “adhere” to the wood, however they fail over time to react to conditions in the same way as the wood below.

Wood is a hygroscopic material, meaning it takes in and releases moisture based the environment where it is used. As such, wood will shrink or swell over time. These changes create cracks or gaps in a surface coating, creating pathways for fire to impact the wood.

Coatings also can be damaged during construction from moisture, handling and installation. The impact from tools such as hammers, power nailers and saws on coated wood could create breaks the coating, both at the point of impact and elsewhere on the piece beyond where the force was applied.

About Color

Fire retardants used in pressure treating are typically colorless and don’t change the appearance of the wood. Since the fire retardant wood looks much like untreated wood, the only indication of treatment is the required quality mark on the wood.

Some manufacturers may use light color tints, or place markings such as a colored line on the narrow edge of the wood to help construction laborers identify fire retardant wood products. These colors and markings also are helpful for building code inspectors to identify fire retardant wood that has been cut or trimmed and there is no quality mark on the piece.

Color should not be considered as an indicator the wood has been pressure treated with fire retardants. There are some wood products in the market with colored surface treatments that are promoted as having fire retardant qualities. These products often appear with pink, green and blue tints. But they lack the the code-mandated quality mark. Without this mark, the product does not meet the building codes requirements and can fail to provide the necessary safety and protection.